WHIRLPOOL REFRIGERATOR ICE AND WATER FILTER 3 (TEAL) – EDR3RXD1

Ice and water filter 3 works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges. Certified to reduce 99% of lead, offering superior contaminant reduction for you and your family.Reduces 28 contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites (NSF 401, 53 and 42 certified). DIY Instructions for Replacing the EDR3RXD1 Whirlpool Refrigerator Ice and Water Filter 3

1. Turn off the water supply to your refrigerator by turning off the valve located behind the fridge.

2. Unscrew the plastic cap from the filter housing, located at the top of your refrigerator. You may need to use some force to unscrew it.

3. Pull out the old filter by grasping it at its sides and pulling it straight out.

4. Take the new filter and make sure it has a snug fit in the filter housing. It should not require any additional force to install.

5. Once the new filter is installed, you can turn the water supply back on by turning the valve behind the refrigerator.

6. Replace the plastic cap and ensure that it’s tightly secured to the filter housing.

7. Reset the “filter change” reminder feature on your refrigerator to let you know when it’s time to replace the filter again.

8. Locate the reset button on your refrigerator and follow the manufacturer’s instructions for resetting the filter life reminder.

9. Flush the system for five minutes before using the ice or water dispenser.

10. Enjoy the improved quality of your refrigerated water with the new filter.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 9020B 4396710 4396711 4396841 4396842 9030B 9030 4396841B 2313412 No more associated models for this part.