Bezel clip assembly works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of s. DIY: How to Replace a Fisher & Paykel 249720P Cooktop Bezel Clip Assembly<\/p>\n
Are you looking to replace your Fisher & Paykel 249720P cooktop bezel clip assembly? If so, this DIY guide is here to help. Follow these easy steps to easily replace the Fisher & Paykel Cooktop Bezel Clip Assembly. <\/p>\n
Materials Needed:
– Phillips screwdriver
– Flathead screwdriver<\/p>\n
Step One: Unscrew the screws that are holding the bezel onto the control panel with the Phillips screwdriver. Carefully lift the bezel off of the control panel and set it aside. <\/p>\n
Step Two: Lift the clips off of the control panel. The old clips will likely have black plastic caps on them. Use a flathead screwdriver to remove the black caps. <\/p>\n
Step Three: Take out the old bezel clip assembly and discard it.<\/p>\n
Step Four: Insert the new bezel clip assembly into the slot in the control panel. Make sure the clip is properly seated in the panel before continuing. <\/p>\n
Step Five: Place the black plastic caps onto the new clip. Make sure they snap into place securely. <\/p>\n
Step Six: Place the bezel back onto the control panel and secure it with the Phillips screwdriver. <\/p>\n
And that’s it! You have replaced your Fisher & Paykel 249720P cooktop bezel clip assembly. Make sure to dispose of the old clips safely and properly. With this DIY guide, you shouldn’t have any trouble replacing your Fisher & Paykel Cooktop Bezel Clip Assembly!<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"