Bearing repair kit works with some GE, and Hotpoint models of clothes dryers. Step 1: Unplug the Dryer
Before starting any repair work, unplug the dryer from the wall.<\/p>\n
Step 2: Open the Dryer Cabinet
To access the dryer’s internal components, open the dryer cabinet. This can be done by removing the top cover, which is typically secured by several screws.<\/p>\n
Step 3: Remove the Drum
You’ll need to disconnect the belt from the pulley system to remove the drum. You should then be able to lift the drum out of the cabinet.<\/p>\n
Step 4: Replace the Bearing
Once the drum is removed, you can access the bearing. Unscrew and remove the old bearing, then replace it with the new WE49X20697 GE Dryer Bearing Repair Kit.<\/p>\n
Step 5: Reassemble the Dryer
Once you have replaced the bearing, you can begin reassembling the dryer. Make sure to securely install the drum back in place, reconnect the belt to the pulley system, and test the dryer to ensure it is operating properly. <\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"