GE General Electric Hotpoint Sears Kenmore Range Oven CONTROL THERMOSTAT WB20K8We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. 1. Start by unplugging the WB20K8 GE Stove Range Oven. If it is hard-wired directly into the wall, turn off the circuit breaker that powers the oven. <\/p>\n
2. Carefully remove the oven\u2019s back plate, which should be accessible by opening the oven door, removing a few screws, and slipping the plate off.<\/p>\n
3. Locate the temperature control thermostat and make note of how it is wired before disconnecting the wires. Also make a note of the type of thermostat installed in your oven. <\/p>\n
4. Disconnect the wiring from the existing thermostat and unscrew its mounting screws. <\/p>\n
5. Remove the old thermostat and place the new one in position, using the same mounting screws. <\/p>\n
6. Make sure the new thermostat is just as the old one was, with the same wire connections and terminal positions. <\/p>\n
7. Replace the back plate and secure it with the screws. Turn on the power to the oven and test it. <\/p>\n
8. Make adjustments to the new thermostat as needed based on the temperature readings. <\/p>\n
With these steps, you can replace the WB20K8 GE Stove Range Oven Temperature CONTROL THERMOSTAT easily and quickly, ensuring your stove operates at the correct temperatures.<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"