GE General Electric Hotpoint Sears Kenmore Range Stove Oven Broil Element Support Bracket Clip WB2X9719We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. DIY Instructions on How to Replace a WB2X9719 GE Support Bracket Clip<\/p>\n
Replacing a WB2X9719 GE Support Bracket Clip is a relatively simple task but it does require some preparation and the proper tools for the job. This guide explains how to safely and effectively remove and replace the WB2X9719 GE Support Bracket Clip.<\/p>\n
Tools Needed to Replace the Clip:<\/p>\n
\u2022 Phillips head screwdriver<\/p>\n
\u2022 Flathead screwdriver<\/p>\n
\u2022 Needle-nose pliers<\/p>\n
Instructions:<\/p>\n
1. Use a Phillips head screwdriver to remove the screws securing the bracket clip to the appliance.<\/p>\n
2. Unscrew the screws holding the bracket clip in place.<\/p>\n
3. Insert a flathead screwdriver into the gap between the two metal pieces.<\/p>\n
4. Carefully pry the metal pieces apart to separate them from the clip.<\/p>\n
5. Place a needle-nose pliers around the plastic portion of the clip to remove it from the metal bracket.<\/p>\n
6. Position the new WB2X9719 GE Support Bracket Clip in the same orientation as the old one.<\/p>\n
7. Secure the bracket clip to the appliance with the screws.<\/p>\n
8. Reassemble the metal pieces around the new clip.<\/p>\n
9. Tighten the screws to secure the clip in place.<\/p>\n
Now your WB2X9719 GE Support Bracket Clip has been successfully replaced!<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"