This is a genuine OEM part that works for some models of GE, and Hotpoint models. DIY Guide: Replacing the WE01X25915 GE Lint Trap Slide<\/p>\n
Are you having trouble with your lint trap slide? Is it not working the way it should? Fear not, as replacing the WE01X25915 GE Lint Trap Slide is actually quite simple. Follow these instructions, and you’ll have it replaced in no time!<\/p>\n
Step 1: Disconnect the power. Ensure your dryer’s power is off before attempting any maintenance or repairs.<\/p>\n
Step 2: Remove the lint filter. Unscrew the screws that hold the lint filter cover on top of your dryer and pull it out.<\/p>\n
Step 3: Remove the lint trap slide. Slide the lint trap out of the base of the lint filter. Two spring clips will be held in place; you can remove these with a screwdriver.<\/p>\n
Step 4: Install the new lint trap slide. Insert the new lint trap slide into the base of the lint filter, making sure to line up the tabs with the slots in the filter base. Push down to secure it in place.<\/p>\n
Step 5: Reinstall the lint filter. Place the lint filter back into the top of the dryer and secure it with the screws you removed earlier.<\/p>\n
Step 6: Reconnect the power. Turn the power back on to your dryer, and you’re all set!<\/p>\n
By following these steps, you can successfully replace the WE01X25915 GE Lint Trap Slide and get your dryer running like new again.<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"