General Electric \/ RCA \/ Hotpoint Washer Timer Assembly WH12X10338We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. Replacing the WH12X10338 GE Washer Timer Assembly \u2013 DIY Instructions <\/p>\n
This guide will provide step-by-step instructions on how to replace the WH12X10338 GE Washer Timer Assembly. Before starting, please ensure that you have all the necessary tools and materials ready, including a new WH12X10338 GE Washer Timer Assembly, Phillips head screwdriver, and a flat screwdriver or putty knife. <\/p>\n
Step 1: Unplug the washer and turn off all power to it. This is an important safety precaution, so make sure that the power is completely cut off before beginning. <\/p>\n
Step 2: Remove the back panel. Using a Phillips head screwdriver, remove the screws that hold the back panel in place. Once the screws are out, gently pull the back panel away from the washer to reveal the wiring, washer\u2019s interior components, and timer assembly. <\/p>\n
Step 3: Locate the timer assembly and disconnect the wiring. The timer assembly is typically located at the bottom of the washer and is distinguishable by its shape and color. To disconnect the wiring, use a flat screwdriver or putty knife to gently pry the wiring away from the timer assembly. <\/p>\n
Step 4: Remove the timer assembly. Once the wiring is disconnected, use a Phillips head screwdriver to unscrew the two bolts that are holding the timer assembly in place. Once the bolts are removed, the timer assembly should slide out easily. <\/p>\n
Step 5: Insert the new timer assembly and reconnect the wiring. Once the old timer assembly is out, insert the new one in its place and secure it with the two bolts. Then, reconnect the wiring and make sure it is properly connected. <\/p>\n
Step 6: Reattach the back panel. After the wiring and timer assembly have been reconnected, use the Phillips head screwdriver to reattach the back panel. <\/p>\n
Step 7: Turn on power and test the new timer assembly. Once the back panel is in place, turn on the power to the washer and run a test cycle to see if the new timer assembly is working correctly. <\/p>\n
Congratulations! You have successfully replaced the WH12X10338 GE Washer Timer Assembly.<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search WDSR2080G0WW WBB2090G3WW WBB2090G5WW WBB2090G7WW WCSR2090G0CC WCSR2090G0WW WCSR2090G2CC WCSR2090G2WW WCSR2090G3CC WCSR2090G3WW WCSR2090G5CC WCSR2090G5WW WCSR2090G7CC WCSR2090G7WW WDSR2080G0CC WBB2090G2WW WDSR2080G2CC WDSR2080G2WW WDSR2080G3CC WDSR2080G3WW WDSR2080G5CC WDSR2080G5WW WDSR2080G6CC WDSR2080G6WW WLSR2000G0WW WLSR2000G2WW WLSR2000G3WW WLSR2000G5WW WLSR2000G6WW GJSR2080H7WW GCSR2090H0WW GCSR2090H2WW GCSR2090H3WW GCSR2090H5WW GCSR2090H7WW GHDSR209H0WW GHDSR209H2WW GHDSR209H3WW GHDSR209H5WW GHDSR209H7WW 1 2<\/p>\n","protected":false},"excerpt":{"rendered":"