{"id":60506,"date":"2023-09-18T10:53:55","date_gmt":"2023-09-18T10:53:55","guid":{"rendered":"https:\/\/repairpartszone.com\/?post_type=product&p=60506"},"modified":"2023-09-18T10:54:41","modified_gmt":"2023-09-18T10:54:41","slug":"ge-suspension-rod-wh16x26908","status":"publish","type":"product","link":"https:\/\/repairpartszone.com\/index.php\/product\/ge-suspension-rod-wh16x26908\/","title":{"rendered":"GE SUSPENSION ROD – WH16X26908"},"content":{"rendered":"

The GE WH16X26908 Rod and Spring Assembly Right-Red is a genuine replacement part for your GE washer. This rod and spring assembly helps keep the door closed while in operation. The red spring attaches to the rod to help with the tension. It is specially designed to fit GE-made washers and is easy to install and replace. Don’t waste your time trying to find an inferior substitute; get the best OEM part quality with the GE WH16X26908 Rod and Spring Assembly Right-Red. We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Step 1: Before beginning the repair, turn off the power to the washer and shut off the water supply lines. If you are using a dryer, ensure you have unplugged it from the wall.<\/p>\n

Step 2: Unscrew the access panels located on the back of the washer. This will allow you to access the internal components.<\/p>\n

Step 3: Locate the GE WH16X26908 Rod & Spring Assembly (Right – Red) on the back of the washer.<\/p>\n

Step 4: Using a pair of pliers, disconnect the spring clip that attaches the assembly to the washer.<\/p>\n

Step 5: Use a flathead screwdriver to unscrew the screws holding the assembly in place.<\/p>\n

Step 6: Carefully pull the old assembly out of the washer and set aside.<\/p>\n

Step 7: Take the new GE WH16X26908 Rod & Spring Assembly (Right – Red) and insert it into the washer, lining it up with the screw holes.<\/p>\n

Step 8: Secure the assembly in place with the screws that were used to remove the old one.<\/p>\n

Step 9: Reconnect the spring clip to secure the assembly in place.<\/p>\n

Step 10: Replace all access panels and screw them in securely.<\/p>\n

Step 11: Turn the power back on and turn the water supply lines back on. Make sure to test the washer to ensure it is working properly.<\/p>\n

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.<\/p>\n","protected":false},"excerpt":{"rendered":"