Washer Tub bearing seal for some models of LG washing machines. DIY Guide: How to Replace the LG 4280EN4001C Washer Tub Bearing Seal Kit<\/p>\n
Replacing the tub bearing seal kit for your LG 4280EN4001C washing machine is a job an average do-it-yourselfer can handle. Doing so will save you time and money and give you the satisfaction of having completed a home repair task. Here\u2019s a step-by-step guide on how to replace the LG 4280EN4001C washer tub bearing seal kit.<\/p>\n
Step 1: Unplug the power cord to the washing machine and turn off the water supply to the washing machine.<\/p>\n
Step 2: Remove the back cover of the washer by unscrewing the two screws located on each side.<\/p>\n
Step 3: Locate the tub bearing seal kit, which is typically located just above the motor and below the outer tub.<\/p>\n
Step 4: Unscrew the mounting bolts and remove the old seal kit.<\/p>\n
Step 5: Clean the surface where the new seal kit will be installed and then use the provided gasket or sealant to make sure that the seal is correctly seated and tight.<\/p>\n
Step 6: Replace the mounting bolts, making sure that they are tightened to the correct torque.<\/p>\n
Step 7: Re-install the back cover to the washing machine and secure it with the two screws.<\/p>\n
Step 8: Turn on the water supply to the washing machine and plug the power cord back into the outlet.<\/p>\n
Now you know how to replace the LG 4280EN4001C washer tub bearing seal kit yourself. However, if you encounter any issues during this process or don\u2019t feel comfortable with performing the repair yourself, please contact a professional service technician to help you.<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search WM1455HVA WM1455HWA 41373<\/p>\n","protected":false},"excerpt":{"rendered":"