LG Electronics Sears Kenmore Dishwasher Door Hinge Cable CONNECTOR ASSY 4933DD3001B\u25cf DOOR HINGE TO SPRING CABLEWe are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs. DIY Guide: How to Replace the LG Dishwasher 4933DD3001B Door Hinge Cable Assembly <\/p>\n
Introduction
The LG Dishwasher 4933DD3001B Door Hinge Cable Assembly is a replaceable component that helps keep the door firmly closed while the dishwasher is running. If the hinge cable fails, the door might not close properly, which can cause the dishwasher to function inefficiently or even fail altogether. If your dishwasher is having trouble staying closed, it’s time to replace the door hinge cable assembly. <\/p>\n
Tools and Materials
\u2013 Phillips head screwdriver
\u2013 Flathead screwdriver
\u2013 Replacement 4933DD3001B Door Hinge Cable<\/p>\n
Step 1: Unplug The Dishwasher
Before beginning the process of replacing the 4933DD3001B Door Hinge Cable Assembly, unplug the dishwasher from its power source. Once the unit is unplugged you can proceed to remove the old and install the new door hinge cable. <\/p>\n
Step 2: Remove the Top Panel
Using the Phillips head screwdriver, unscrew the screws at the top of the dishwasher panel. This panel should come off easily once the screws are removed. <\/p>\n
Step 3: Remove the Old Hinge Cable Assembly
Once the top panel is removed, locate the existing hinge cable assembly. You should see two metal brackets that hold the cable in place. Using the flathead screwdriver, carefully pry the brackets away from the hinge cable. Once the brackets are removed, pull the old hinge cable out of its place. <\/p>\n
Step 4: Install the New Hinge Cable
Now that the old hinge cable has been removed, you are ready to install the new one. Place the new hinge cable into the same position as the old one was. It should fit snugly into the space. <\/p>\n
Step 5: Secure The New Hinge Cable
Using the flathead screwdriver, secure the new hinge cable by placing the metal brackets back onto the cable. Make sure that the brackets are secure so that the cable will stay in place. <\/p>\n
Step 6: Replace the Top Panel
Once the new hinge cable is installed, you can replace the top panel. Use the Phillips head screwdriver to secure the top panel into place. <\/p>\n
Conclusion
You have now replaced the LG Dishwasher 4933DD3001B Door Hinge Cable Assembly. Be sure to plug the dishwasher back in before testing it out. With the new hinge cable in place, your dishwasher should now run as efficiently as ever.<\/p>\n
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search LDF7774BD LDT9965BD LSDF9962ST LSDF9969BD D1454CFN<\/p>\n","protected":false},"excerpt":{"rendered":"